How to Install Lawn Edging

Installing lawn edging is one of the best ways to improve the aesthetics and safety of your garden.

Usually, lawn edging serves the purpose of separating the lawn from the general landscape. And the proper installation of edging in your lawn brings about a more appealing yard.

How to Install Lawn Edging

In this post, you’ll learn how to install lawn edging using a step-by-step method. First, we provide a list of the tools you would need to complete the installation process. Next, we carefully describe the procedures – from marking out the selected area to sealing up the trench with sand and water. Read on to find out more.

Necessary Tools for Installing Lawn Edging

Necessary Tools for Installing Lawn Edging

The proper installation of lawn edging is closely tied to your choice of tools. Apart from the fact that you need the edging (which is most important), you require other measuring and installation tools.

Altogether, the tools listed below will enable you to achieve the most effective edging installation:

  1. Measuring tape
  2. Shovel/Trench-digging instrument
  3. Garden hose
  4. Sand
  5. Water
  6. Rake
  7. Spray paint
  8. Stakes
  9. Wheelbarrow
  10. Hammer
  11. Flat spade
  12. Edging
  13. Edging connectors
Feel free to select the specific tools that will work in your own garden situation.

Steps You Should Follow to Install Lawn Edging

Steps You Should Follow to Install Lawn Edging

Follow these steps to improve the look of your lawn:

Step 1 – Determine and Dig the Area you Intend to Install Edging in

The first most important step when trying to install lawn edging is to determine where you want it. Is it around trees or a rocky area?

When you’ve determined the specific area for the edging installation, mark that area with spray paint. Next, dig into the soil and create a trench using a trench-digging tool or a shovel, preferably.

Remember to dig up to 6 inches into the ground so the edging can fit in without staying obvious on the surface. Also, ensure that the sand you shovel out of the soil goes into a wheelbarrow or a large bucket since you’d be using the sand later on.

Step 2 – Purchase the Required Quantity of High-Quality Plastic Edging

It’s equally essential that you purchase high-quality plastic edging that is durable and safe from the elements.

When you measure the specific area of your lawn that needs edging, estimate a little more so that you purchase more than you actually need.

Step 3 – Carefully Install Lawn Edging

After digging, loosen the edging and carefully insert it into the demarcated area. Ensure that the trench receives almost all of the edging to prevent falls and other forms of accidents or damage.

You might want to use edging connectors to attach each edging part for a neatly-done edging installation.

Step 4 – Fill Edging Area with Sand

At this stage, you need to fill up the sides of the edging with the sand you previously dug out. Make sure you fill up both sides until it all looks the same as the ground around it.

Step 5 – Water the Edging Area

The final step involves watering the edging area with a garden hose. Adding water to the soil helps to create a firmer hold around the soil and the edging.

Wrap Up

What you’ve read above is an easy-to-follow procedure for installing lawn edging.

Pay attention to the tools listed above, and be careful to purchase more edging that you actually need. It would come in handy in the future.

Did you find this post helpful? Leave a comment below!

Leave a Reply